Leviton WSS20-G9N
Leviton LevNet RF WSS20-G9N Receiver Switch With Color Change Kit, 902 MHz, <0.5 W
Occupancy and Motion Sensors
7403709
WSS20-G9N
Leviton
$0.00
/ ea
Levnet Rf Wire In Receiver Switch. Decora Rocker. 10A Relay. Dip Switches For Auto On/auto Off. Manual On/auto Off. Walk-through Mode. Repeater Disabled. Time Delay 2/10/20/30m. Range of 30 ft -130 ft. Radio Frequency 902mhz.
- Features
- Decora® design aesthetics, intuitive rocker switch with return to center design
- No new wiring required, the LevNet RF™ wall switch receivers simply replaces the existing light switch and communicates with self-powered switches and sensors via radio 902 MHz frequency
- Vacancy switching, provides pushbutton manual ON/OFF light switching of each light load at any time
- Maximize energy savings, when paired with LevNet RF™ PIR occupancy Sensor, the LevNet RF™ wall switch receivers contain all sensor settings
- Manual ON/auto ON, auto ON/auto OFF, Walk-through timer, auto time out selections of 2 min for testing (10, 20 or 30 min)
- Allows flexibility and customized adjustments to maximize energy savings
- Presentation/viewing mode, turn lights OFF and keep them OFF while room is occupied (i.e. for slide or film presentations), automatically returns to normal when manually switched back ON or room becomes vacant and time delay expires
- Walk-through feature, maximizes energy savings by assuring a 2.5 min timeout if motion is not present after 2.5 min in auto ON mode
- Standard size for seamless installation, LevNet RF™ wall switch receivers fit in a standard 1-gang wallbox
- Zero cross relay switches at the zero crossing point of the AC power curve to ensure maximum contractor life and compatibility with electronic ballasts
- Energy savings and efficiency, lowest power consumption of any RF device <1/2 W per 120 VAC device and <2/3 W per 277 VAC device annually approximately 70% savings over other RF devices
- Air gap switch, assures A/C power disconnects for safety on no neutral switch
- Color change kits, white, ivory and light almond included for design flexibility, ease of ordering, inventory and cost control
- 10 a load rating for commercial lighting circuits
- EnOcean® technology enabled, for LevNet RF™ communication from self-powered lighting controls
- HIS (high inrush stability), arcing design for use with all commercial ballasts
- Retrofit energy saving bi-level lighting with occupancy sensor control, replace two light switches with LevNet RF™ wall switch receivers pair both with self-powered RF PIR sensor, set the first LevNet RF™ wall switch to auto ON/auto OFF and the second to manual ON/auto OFF
- Product compatibility, LevNet RF™ 902 MHz products
- Repeater disabled
- Dip switches for auto ON/auto OFF