Fluke Corporation FLUKE-773

Fluke FLUKE-773 Milliamp Process Clamp Meter, 0 to 30 VDC, 0 to 100 mA, Backlit Display
Meters
6995210 FLUKE-773
Fluke Corporation
$0.00 / ea

Fluke Corporation FLUKE-773
Fluke Clamp Meter, Milliamp Process, 0 to 30 VDC, 0 to 100 mA Electrical Rating, Backlit Display, 0.2% + 2 Counts Voltage Accuracy, (4) 1.5 V AA Alkaline Batteries Power Source, -10 to 50 deg C Operating, 11.61 in L x 5.91 in W x 2.95 in H Dimensions, Plastic
QTY
Add to Wishlist
  • Features
  • Hard plastic enclosure type
  • Measurement spotlight illuminates hard to see wires in dark enclosures
  • Best in class 0.2% accuracy
  • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
  • Measure 4 to 20 mA signals without "breaking the loop"
  • Detachable clamp with extension cable for measurements in tight locations
  • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
  • Automatically change the 4 to 20 mA output for remote testing
  • Power saving features, auto-off, backlight timeout extend battery life
  • Hold function captures and displays changing measurements
  • -25 to 60 deg C storage temperature, IP 40 IP, 0.177 in or 4.5 mm Max diameter of measurable conductor, < 90% at < 30 deg C, < 75% at 30 to 55 deg C operating humidity, 0 to 2000 m operating altitude, random 2 g, 5 to 500 Hz vibration, 1 meter drop test shock, 0.01% deg C temperature coefficient, (4) AA 1.5 V alkaline, IEC LR6, 40 hours typical power, battery life
  • Simultaneous mA in-circuit measurement with 24 V loop power for powering and testing transmitters, source 4 mA to 20 mA signals for testing control system I/O or I/Ps, measure 4 mA to 20 mA signals with in-circuit measurement
  • Scaled mA output provides a continuous mA signal that corresponds to the 4 mA to 20 mA signal measured by the mA clamp, enables milliamp signal logging to a separate logging device without breaking the loop
  • Output mA signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop, apply a mA input signal to a device and measure its 4 to 20 mA output on devices such as valves or mA isolators voltage output linear ramp or 25% step output, automatically change the voltage output for remote testing
  • 0 to 20.99 mA at 0.2% + 2 counts accuracy, 21.0mA to 100.0 mA at 1% + 5 counts accuracy measuring range