Allied Moulded LH-11P
Allied Moulded LH-11P Keyless Lampholder, 660 W, 250 VAC, Medium Incandescent Lamp
Lamp Holders
7087939
LH-11P
Allied Moulded
$0.00
/ ea
Keyless medium base incandescent lampholder - Nickel plated brass screw shell, mounting slots accept 3/O or 4/O outlet boxes, accepts most mfgs bulb protective cages - Incandescent lamp holder for use in attics, basements, closets and garages where on/off switch exists - Keyless medium base lampholder - Edison base - Max 660 Watts 250 Volts - Size Dia. 4 9/16"
- Features
- Nickel-plated brass screw shell, mountings lots accept 3.5 or 4 in outlet boxes, accepts most manufacturers light bulb protective cages
- Plated carbon steel fasteners
- Heat resistant thermoset material
- 4 terminal screws (mounting screws included)
- Item designation: P according to DIN EN 61346-2, H according to DIN 40719 extendable after IEC 204-2/according to IEC 750
- Suitability for integration pressure selection button, suspension switch, front element, suspension pushbutton
- Operating cycles/maximum: 1000 per hr, electrical operating cycles as operating time/with contactors 3RT1015 to 3RT1026/typical: 100000000, mechanical operating cycles as operating time/typical: 10000000
- IP20 of terminal enclosure, IP40 of housing
- Auxiliary Contacts: 2 X 1 - 1.5 sq-m solid, 2 X 0.5 - 0.75 sq-mm solid with conductor end processing, 2 X 0.5 - 1.5 sq-mm stranded with conductor end processing, 2 X 18 - 14 AWG conductors
- 0.8 Nm tightening torque
- Rated Impulse Voltage: 4 kV
- 250 VAC rated insulation voltage