Wattstopper PW-200-LA
WattStopper PW-200-LA Dual Relay Wall Switch Occupancy Sensor, 120/230/277 VAC, Passive Infrared Sensor, 525 sq-ft Coverage, 180 deg Viewing, Strap Mount
Occupancy and Motion Sensors
6937441
PW-200-LA
Wattstopper
$0.00
/ ea
- Material: Plastic
- Mounting Type: Strap
- Color: Light Almond
- Connection Type: Flying Lead
- Control Output: Automatic On/Off, Manual On/Off
- Coverage: 525
- Dimensions: 2.73 in L x 1.76 in W x 1.83 in H
- Lamp Type: Fluorescent/Incandescent/LED
- Power Rating: 0 to 1200 W, 1/6 hp
- Sensor Type: Passive Infrared
- Series: PW Series
- Temperature Rating: 35
- Time Delay: 5 to 30
- Type: Dual Relay
- Viewing Angle: 180
- Voltage Rating: 120/230/277
The PW-200 passive infrared (PIR ) wall switch sensor turns lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits, and a variety of features. (light almond)
- Features
- Time delay adjustments - 5 to 30 min at minimum, 3 minimum if no activity after 30 sec at walk through mode, 5 sec for 10 min with DIP switch setting at test mode
- High or low (dip switch) PIR adjustment
- 0 to 800 W tungsten or ballast, 1/6 hp motor load limit for each relay at 120 VAC and 0 to 1200 W ballast load limit for each relay at 277 VAC
- Detection signature analysis eliminates false triggers and provides immunity to RFI and EMI
- Zero crossing for long relay life
- Vandal-resistant lens combines precise coverage with durability
- Choice of manual-on or auto-on operation
- Selectable walk thorough mode turns lights off 3 min after the room is initially occupied if no motion is detected after the first 30 s
- Test mode allows quick and easy adjustments
- Selectable audible alert for impending shutoff
- In automatic mode, sensor returns automatically to auto On after lights are turned Off manually, ideal for presentations
- Four occupancy logic options give users the ability to customize control to meet application needs
- Optional light level sensing with simple setup
- Service mode allows sensor to operate as a service switch in the unlikely event of a failure
- Sensor coverage tested to NEMA guide publication WD 7 to 2000
- Compatible with decorator wallplates
- 2-relays for control of two separate lighting loads or circuits
- Magnetic or electronic ballast load type
- Wall switch sensor turns lights off and on based on occupancy
- It contains two relays for controlling two independent lighting loads or circuits