Baldor 073356
Dodge 073356 208 Normal Duty Pillow Block Ball Bearing Unit, 1-1/2 in Dia Bore, 5.18 to 5.88 in L Bolt Center-to-Center, 1.94 in Base to Bore Centerline, 7-1/4 in OAL x 4 in OAH
Pillow Block Ball Bearing Units
7599247
073356
Baldor
$0.00
/ ea
- Base to Bore Centerline: 1.94
- Base Width: 1.93
- Bolt Center-to-Center Length: 5.18 to 5.88
- Bore Diameter: 1-1/2
- Bore Type: Round
- Expansion Type: Non-Expansion (Fixed)
- Finish: Powder Coated
- Load Capacity: 7332 lb Dynamic/4475 lb Static
- Locking Device: D-LOK® Concentric Clamp Collar
- Material: Cast Iron
- Maximum Speed: 5000
- Mounting Type: Two-Bolt Base
- Overall Height: 4
- Overall Length: 7-1/4
- Overall Width: 2.01
- Seal Type: Single Lip
- Series: 208
- Type: Normal Duty
Dodge Pillow Block Ball Bearing Unit, Normal Duty, Series: 208, 1-1/2 in Bore, 5.18 to 5.88 in Bolt Center-to-Center Length, 1.94 in Base to Bore Centerline, 7-1/4 in Overall Length, 2.01 in Overall Width, 4 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.93 in Base Width, D-LOK Concentric Clamp Collar Locking Device, Single Lip Seal, Non-Expansion (Fixed), 7332 lb Dynamic/4475 lb Static Load, 5000 rpm Maximum, Cast Iron, Powder Coated
- Features
- Wide inner ring
- Precision hardened and honed inner and outer rings
- New rugged housing design
- DualGuard™ positive contact seal including rubberized flingers
- Stronger and flexible ball retainer
- Simplified anti-rotation device
- Electrostatically applied epoxy paint
- Low backing height pillow block
- No lube or sealed for life