Wattstopper LS-102

WattStopper LS-102 Automatic Closed Loop Switching Photosensor, 12/24 VAC/VDC, Fixture/Panel Mount, Plastic
Occupancy and Motion Sensors
7052160 LS-102
Wattstopper
$0.00 / ea

Wattstopper LS-102
  • Amperage Rating: 7
  • Dimensions: 2.4 in Dia x 0.7 in D
  • Environmental Conditions: 35 deg F Operating Temperature, 95% Non-Condensing Relative Humidity
  • Material: Plastic
  • Mounting Type: Fixture/Panel
  • Operating Cycles: 108
  • Sensor Type: Daylight
  • Type: Automatic Closed Loop
  • Voltage Rating: 12/24
This Daylighting Controller is a single zone, on/off switching device designed to be installed in a closed loop application. A self-contained 24 VDC device with an extended range of 1-1400 footcandles, the product requires a low voltage power pack to operate. The controller consists of an advanced digital multi-band photosensor, an on-board microcontroller, and an LCD display. This photosensor is positioned behind a 100Вє cone that cuts off unwanted light, preventing false triggers.
QTY
Add to Wishlist
  • Features
  • Single zone, on/OFF switching photo sensor
  • Automatic setpoint selection
  • Easy to read LCD display and LED status indicators
  • Automatic startup/calibration
  • Digital multi-band photo sensor
  • Multiple user adjustable control parameters
  • Test mode overrides programmed time delay, enabling installer to verify accuracy of settings
  • Control load status verification allows testing and confirmation that wiring is correct
  • Form factor designed to eliminate misalignment
  • 1 hr manual override capability (when wired with low voltage, pushbutton wall switch)
  • Multi-function green LED status indicator
  • Programmable in most daylight conditions
  • 1 to 1400 fc digital multi-band photo sensor
  • 1 to 850 fc on setpoint range