Wattstopper DSW-100-W

WattStopper DSW-100-W Dual Technology Single Relay Wall Switch Occupancy Sensor, Passive Infrared/Ultrasonic Sensor, 1050 ft Coverage, 180 deg Viewing, Surface Mount
Occupancy and Motion Sensors
7152751 DSW-100-W
Wattstopper
$0.00 / ea

Wattstopper DSW-100-W
  • Color: White
  • Connection Type: Flying Lead
  • Control Output: Automatic On/Off, Manual On/Off
  • Coverage: 1050
  • Dimensions: 2.73 in L x 1.76 in W x 1.83 in H
  • Lamp Type: Fluorescent/Incandescent
  • Material: Plastic
  • Mounting Type: Surface
  • Power Rating: 0 to 1200 W, 1/6 hp
  • Sensor Type: Passive Infrared/Ultrasonic
  • Series: DSW
  • Temperature Rating: 35
  • Time Delay: 5 to 30
  • Type: Dual Technology Single Relay
  • Viewing Angle: 180
The DSW-100 dual technology wall switch sensor turns lights ON and OFF based on occupancy. It combines the benefits of passive infrared (PIR) and ultrasonic detection technologies, and is characterized by high sensitivity to small and large movements. The DSW-100 replaces existing wall switches and fits behind a standard decorator wall plate. (white)
QTY
Add to Wishlist
  • Features
  • Time delay adjustments - 5 to 30 min at minimum, 3 minimum if no activity after 30 s at walk through mode, 5 s for 10 min with dip switch setting at test mode
  • High or low (dip switch) PIR adjustment and minimum to maximum (trimpot), OFF ultrasonic adjustment
  • 0 to 800 W tungsten or ballast, 1/6 hp motor load limit for each relay at 120 VAC and 0 to 1200 W ballast load limit for each relay at 277 VAC
  • Complies with 2011 NEC requirements
  • Detection signature analysis eliminates false triggers and provides immunity to RFI and EMI
  • Zero crossing for long relay life
  • Vandal-resistant lens combines precise coverage with durability
  • Choice of manual on or auto-ON operation
  • Selectable walk through mode turns lights off 3 min after the room is initially occupied if no motion is detected after the first 30 s
  • Test mode allows quick and easy adjustments
  • Selectable audible alert for impending shutoff
  • In automatic mode, sensor returns automatically to auto-ON after lights are turned OFF manually, ideal for presentations
  • Four occupancy logic options give users the ability to customize control to meet application needs
  • Optional light level sensing with simple setup
  • Service mode allows sensor to operate as a service switch in the unlikely event of a failure
  • Sensor coverage tested to NEMA guide publication WD 7-2000
  • Compatible with decorator wallplates
  • One relay and one on/OFF button
  • Magnetic or electronic ballast load type
  • Turn lights on and off based on occupancy