Eaton DPU222RGF15WTST
EATON DPU222RGF15WTST Non-Fusible Pullout Air Conditioning Disconnect With 15 A Weather/Tamper Resistant Ground Fault Self-Test Receptacle, 120/240 VAC, 60 A, 10 hp
Receptacles
7786657
DPU222RGF15WTST
Eaton
$0.00
/ ea
- actuator type: Padlock
- Amperage Rating: 60
- Color: Gray
- Dimensions: 7-1/2 in L x 4-3/4 in W x 13 in H
- Enclosure Type: NEMA 3R
- Finish: Galvanized
- Horsepower: 10
- Material: Steel
- terminal type: Line/Load Lug
- Type: Non-Fusible Pullout
- Voltage Rating: 120/240
EATON Air Conditioning Disconnect, Non-Fusible Pullout, 120/240 VAC, 60 A, 10 hp, Padlock Actuator, NEMA 3R Enclosure, Line/Load Lug Terminal, 7-1/2 in L x 4-3/4 in W x 13 in H Dimensions, Steel, Gray, Galvanized
- Features
- ON/OFF control provided by a pull out handle
- Pull out handle can be conveniently stored in the compartment in the OFF position, helping to prevent the handle from being misplaced
- Protective shield cannot be removed until the pull out handle is removed, disconnecting the power
- NEMA 3R outdoor enclosures offered in metallic and non-metallic versions
- Easy to remove high strength protective shield for easier wiring and mounting
- Easy to remove front cover (no screws or fasteners to remove)
- 1 in knockouts on the bottom, back and side of unit
- Copper rated line and load lugs that are easily accessible
- Ample wiring space for mounting with a stud gun (1-keyhole, 2/3-point mounting)
- Horsepower rated (10 hp maximum at 240 VAC)
- Padlockable door provision for safety and reduction of tampering
- Metallic enclosures are bottom entry and exit only
- Non-metallic enclosures have knockouts and a hub provision for top access
- Non-metallic enclosures have a single unit door and protective shield for installer convenience
- Non-metallic enclosures are durable and provide excellent resistance to climate changes
- 10 hp at 240 VAC
- 14 to 3 AWG Al/Cu wire