Wire & Cable 66311203

Southwire reg; 66311203 Type THHN/THWN Building Wire, 600 VAC, (1) 10 AWG Annealed Solid Copper Conductor, 500 ft L, Yellow
Striped TFFN and THHN Wire
5659732 66311203
Wire & Cable
$0.00 / ft

Wire & Cable 66311203
  • Amperage Rating: 30
  • Conductor size: 10
  • Conductor Type: Annealed Solid Copper
  • Insulation Material: PVC
  • Jacket Color: Yellow
  • Jacket Material: Nylon
  • Length: 500
  • Number of Conductors: 1
  • Outside Diameter: 161
  • Strands: 19
  • Temperature Rating: 90
  • Type: Type THHN/THWN
  • Voltage Rating: 600
Southwire Building Wire, Type THHN/THWN, 600 VAC, 30 A, 1 Conductor, Annealed Solid Copper Conductor, 10 AWG Conductor, 161 mil OD, 500 ft Length, 19 Strands, PVC Insulation, Nylon Jacket, Yellow Jacket, 90 deg C
QTY
Add to Wishlist
  • Features
  • Southwire® type THHN or THWN-2 or MTW copper conductors are annealed (soft) copper, insulated with a tough heat and moisture resistant polyvinyl chloride (PVC), over which a nylon (polyamide) or UL listed equal jacket is applied
  • Conductor sizes 2 AWG and larger listed and marked sunlight resistant in black only
  • Conductors shall be UL listed type MTW or THHN or THWN-2 gasoline and oil-resistant II, suitable for operations at 600 volts as specified in the national electrical code
  • Conductors shall be annealed copper, insulated with high-heat and moisture resistant PVC jacketed with abrasion, moisture gasoline, and oil-resistant nylon or listed equivalent, as manufactured by Southwire® company or approved equal
  • Thermoplastic insulation/nylon sheath heat, moisture gasoline and oil resistant
  • Allowable ampacities shown are for general use as specified by the national electrical Code, 2005 Edition, section 310.15 unless the equipment is marked for use at higher temperatures the conductor ampacity
  • Allowable ampacities when terminated to equipment for circuits rated 100 A or less or marked for size 14-1 AWG conductors, MTW wet locations or when exposed to oil or coolant at 60 deg C
  • Allowable ampacities when terminated to equipment for circuits rated 100 A or marked for conductors larger than size 1 AWG, THWN-2 when exposed to oil or coolant, MTW dry locations at 75 deg C
  • Allowable ampacities THHN dry locations, THWN-2 wet or dry locations, for ampacity derating purposes at 90 deg C
  • For dry locations at temperatures not to exceed 90 deg C
  • For use in wet or dry locations at temperatures not to exceed 90 deg C or not to exceed 75 deg C when exposed to oil or coolant