NSI 2117
NSI Tork 2117 2110 Photocontrol, 120 VAC, 3000 W Tungsten, 3000 VA Ballast, Stem/Surface Mount, Die Cast Aluminum
Timer
7095884
2117
NSI
$0.00
/ ea
- Ballast Load: 3000
- Contact Form: SPST
- Dimensions: 3-3/4 in L x 2 in W x 1-1/2 in H
- Environmental Conditions: -40 to 140 deg F Operating Temperature
- Frequency Rating: 50/60
- Material: Die Cast Aluminum
- Mounting Type: Stem/Surface
- Sensitivity: 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio
- Sensor Type: Cadmium Sulfide Cell
- Series: 2110
- Timing Range: 2
- Tungsten Rating: 3000
- Voltage Rating: 120
- Wire size: 16
NSI Tork Photocontrol, Series: 2110, 120 VAC, 50/60 Hz, 3000 W Tungsten, 3000 VA Ballast, SPST, 2 min, 16 AWG Wire, Cadmium Sulfide Cell Sensor, 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio, Environmental Conditions: -40 to 140 deg F Operating Temperature, Stem/Surface Mount, Die Cast Aluminum, 3-3/4 in L x 2 in W x 1-1/2 in H
- Features
- Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye
- Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning and more
- Die cast aluminum housing and base, gasketed for weather protection
- Works with screw base CFL
- Cadmium sulphide, epoxy conformal coated 1/2 in diameter, 1 in cell
- Remain closed between dusk and dawn (the unit fails in the on position) contacts
- Three color coded, minimum 6 in wire leads, 16 AWG, rated for 105 deg C lead wires
- Cadmium sulphide