Appleton EYS014

Appleton UNILETS EYS014 Dust-Ignitionproof Explosionproof Raintight Conduit Sealing Fitting, 6 in, For Use With IMC/Threaded Rigid Metallic Conduit, Grayloy-Iron, Triple Coated
Sealoffs
574501 EYS014
Appleton
$0.00 / ea

Appleton EYS014
  • Dimensions: 12.13 in L x 7.63 in W
  • Finish: Triple Coated
  • Material: Grayloy-Iron
  • Series: EYS
  • Size: 6
  • Suitable For Use With: IMC/Threaded Rigid Metallic Conduit
  • Type: Dust-Ignitionproof Explosionproof Raintight
Explosionproof Rigid/IMC Conduit Seal, Turning Radius 5.38 Inch, Trade Size 6 Inch, Connection Type Female, Material Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron, Mounting Position Horizontal/Vertical, Enclosure Class I Div 1 and 2 Group A B C D, Class II Div 1 and 2 Group E F G, Class III, Approval UL 886/E10444, CSA C22.2, Size 12.13 Inch L x 7.63 Inch W, Constructional Feature Explosionproof, Dust-Ignitionproof, Raintight, Used On Threaded Rigid/IMC Metal Conduit
QTY
Add to Wishlist
  • Features
  • Smooth, rounded integral bushing in each hub to protect conductor insulation
  • Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
  • Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
  • Large opening for damming and filling
  • Restrict any explosion to the sealed off enclosure
  • Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
  • Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
  • Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
  • Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
  • Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
  • Tapered FNPT connection
  • 25% fill vertical and horizontal conduit sealing fittings for close turning radius
  • Chromate/epoxy powder coated/zinc electroplated finish