ABB Installation Products AB228HDGC
Superstrut AB228HDGC Open Angular Fitting, 4 Holes, 4-7/8 in L x 1-5/8 in W, 45 deg Bend, Steel
Channel-Strut Joiner
7485864
AB228HDGC
ABB Installation Products
$0.00
/ ea
- Bend Angle: 45
- Depth: 5-1/4
- Finish: Hot Dipped Galvanized
- Length: 4-7/8
- Material: Steel
- Number of Holes: 4
- Suitable For Use With: 12, 14 or 16 ga Channel
- Thickness: 2.5
- Type: Open
- Width: 1-5/8
Angular Fitting. Open 45 Degree Angle. 4 Holes. 4-7/8 Inch side X 5-1/4 Inch side X 1-5/8 width. Zinc coating is applied by hot-dipping after fabrication. Is in conformance with ASTM A-123, Grade 65 specification standards. Minimum of 2.5 mill thickness.
- Features
- Unless otherwise noted, nuts and bolts for use with fittings and brackets should be ordered separately
- Zinc coating is applied by hot dipping after fabrication, is in conformance with ASTM A-123, grade 65 specification standards
- Minimum of 2.5 mil THK
- Load ratings vary depending fittings and brackets are used with 12, 14 or 16 ga channel