nVent Hoffman WS74XM7518SS
nVent HOFFMAN WATERSHED™ WS74XM7518SS WS2D Disconnect Enclosure, 74 in L x 75 in W x 18 in D, NEMA 4X/IP66 NEMA Rating, 304 Stainless Steel
Free Standing / Floor Mounted
5783192
WS74XM7518SS
nVent Hoffman
$0.00
/ ea
- Cover Type: Bullet Hinged/Lift-Off
- Depth: 18
- Finish: Brushed
- Length: 74
- Lock: 3-Point Latch/Padlock Handle
- Material: 304 Stainless Steel
- Mounting Type: Freestanding
- Nema Rating: NEMA 4X/IP66
- Series: WS2D
- Width: 75
WaterShed Freestand Disconnect Enclosure Type 4X, 74x75x18, Brushed, SS304
- Features
- Manufactured from 12 ga 304 stainless steel, back is 10 ga, seams continuously welded and ground smooth
- Smooth type 304 stainless steel lift-off bullet-style hinges, hinges are shielded by door edges
- Hinged side of door has provisions to allow direct flushing of hinge area
- 20 deg sloped top facilitates runoff of water and cleaning solutions and prohibits placement of objects on top of enclosure
- 170 deg door opening
- Door edges are sloped 20 deg at top and bottom edges to facilitate runoff
- Slanted flange trough collar prohibits pooling of fluids along the top edge of the enclosure opening
- Heavy duty three point latching mechanism operated by type 316 stainless steel POWERGLIDE™ padlocking handle on all doors
- Master door has POWERGLIDE™ handle with integral screwdriver defeater
- Mechanical interlock activated by master door prevents slave doors from being opened first, doors can be closed in any order
- Master door is far right hand door on all enclosures
- Seamless foam in place one-piece gasket provides an oil-tight, watertight and dust tight seal against contaminants
- Bonding provision on door, grounding stud on body
- Accessory mounting channel provided in enclosure top
- Heavy duty lifting eyes are 316 stainless steel
- Removable center post permits easy panel installation
- Preferred cutout on right flange provides mounting for most disconnect operators
- Furnished hardware kit consists of panel mounting nuts, grounding hardware and hole seals for bottom mounting holes, no 4 Brushed