Eaton S811+T18N3S
EATON S811+T18N3S Non-Combination T-Frame Soft Starter, 3 Poles, NEMA 0 Enclosure
NEMA Contactors and Starters
7697049
S811+T18N3S
Eaton
$0.00
/ ea
- Amperage Rating: 180
- Dimensions: 6.47 in L x 7.65 in W x 12.71 in H
- Enclosure Type: NEMA 0
- Frequency Rating: 47/63
- Number of Poles: 3
- Operating Temperature: -30 to 50
- Series: S811
- Type: Non-Combination T-Frame
- Voltage Rating: 200 to 600
EATON Soft Starter, Non-Combination T-Frame, Series: S811, 200 to 600 VAC, 180 A, 47/63 Hz Frequency, 3 Pole, NEMA 0 Enclosure, -30 to 50 deg C Operating, 6.47 in L x 7.65 in W x 12.71 in H Dimensions
- Features
- Communication capabilities with various protocols
- Digital interface module (DIM) provides an intuitive, easy to use human interface with powerful configuration capabilities to maximize system performance
- Door or device mounted dim enables users to safely configure, commission, monitor and troubleshoot the system at the electrical panel without opening the enclosure door
- System operating parameters can be monitored enterprise wide through a communications network
- Increase uptime by providing data for process management and preventive diagnostics
- Run bypass mode greatly reduces internal heating created by the greater power dissipation in the SCRs
- Bypass contactors directly connect the motor to the line and improves system efficiency by reducing internal power losses
- Internal solid state overload protection provides accurate current measurement and trip settings
- Internal run bypass contactors and overload protection eliminate the need for additional devices, reducing enclosure sizes minimizing installation and wiring time and reducing overall assembly size and cost
- Wide range of overload FLA settings and a selectable trip class offers users the flexibility to fine tune the starter to match specific application requirements
- Variable ramp times and torque control settings provide unlimited starting configurations, allowing for maximum application flexibility
- Kick start feature enables soft starting of high friction loads
- Soft stop control for applications where an abrupt stop of the load is not acceptable
- Pump control option with sophisticated pump algorithms on both starting and stopping that minimize the pressure surges that cause water hammer
- 6 SCRs control all 3 motor phases, providing smooth acceleration and deceleration performance
- Soft acceleration and deceleration reduces wear on belts, gears, chains, clutches, shafts and bearings
- Reduce the peak inrush current's stress on the power system
- Minimize peak starting torque to diminish mechanical system wear and damage