Littelfuse DCSA50
Littelfuse DCSA50 Current Transducer, 0 to 50 mA AC Input, 10 to 30 VDC, 4 to 20 mA, 1 to 5 VDC or 2 to 10 VDC Output, +/-0.25 % Accuracy
IEC Electronic Protective Devices
7486410
DCSA50
Littelfuse
$0.00
/ ea
- Accuracy: +/-0.25
- Electrical Connections: Wire Clamp Terminal
- Humidity Range: 95% Relative Non-Condensing
- Input: 0 to 50 mA AC
- Mounting Type: DIN Rail
- Output: 10 to 30 VDC, 4 to 20 mA, 1 to 5 VDC or 2 to 10 VDC
- Series: DCSA
- Temperature Rating: -30 to 60
The DCSA Series is a loop-powered, linear output current transducer that provides an output that is directly proportional to the RMS AC current passing through the LCSC10T12 sensor. The DCSA provides either an analog current or voltage: 4 - 20 mA, 1 to 5VDC, or 2 to 10VDC. Each unit is factory calibrated for monitoring (with the LCSC10T12 connected) in one of four ranges; 0 - 5, 0 - 10, 0 - 20, or 0 - 50A. Zero and span adjustments allow field calibration if needed. The DCSA mounts on both DIN 1 and DIN 3 rails.
- Features
- 0 to 50 A in 4 ranges using LCSC10T12 sensor
- Loop powered from 10 to 30 VDC
- Zero and span adjustments
- Separate sensor and control unit