Eaton AFAX20
EATON Crouse-Hinds AFAX20 Explosionproof Replacement Double End Conveyor Belt Alignment Switch, 600 VAC, 15 A, 2NC Contact
NEMA Disconnect Switches
360992
AFAX20
Eaton
$0.00
/ ea
- Action: Snap
- Actuator: Plunger
- Amperage Rating: 15
- Contact Configuration: 2NC
- Dimensions: 11.81 in W x 5.68 in H
- Enclosure: NEMA 3/4/IP66
- Material: Feraloy® Iron Alloy
- Mounting: Surface
- Series: AFAX
- Type: Explosionproof Replacement Double End
- Voltage Rating: 600
Eaton Crouse-Hinds series AFAX conveyor belt alignment switch, 15A, Two normally closed, Feraloy iron alloy, 600 Vac
- Features
- Finished with precision switches that provide normally open and normally closed contacts
- Housing consists of a center section which can be mounted either vertically or horizontally and a switch housing with an attached switch operating arm
- Enclosure has three 1 in conduit hubs, cast mounting lugs on 1-1/2 in center permit attachment to the web of a standard 3 in angle iron
- Operating arm has 3-1/2 in long stainless steel protective roller, approximately 3/4 in lateral movement of operating arm actuates switch
- Spring loaded operating arm will automatically return switch to normal position when belt interference is removed
- A severe conveyor belt run-off can rotate the operating arm counter clockwise up to 85 deg without damage to the switch mechanism
- Installation of AFA or AFAX unit on either side of a conveyor belt allows approximately 1 in or a pre-determined allowable belt misalignment before switch is actuated
- A typical installation would include a pair of AFA or AFAX units at each end of the conveyor belt where belt returns