Eaton DH364UWK
EATON DH364UWK Heavy Duty Non-Fusible Single Throw Safety Switch, 600 VAC, 200 A, 15 hp, 40 hp, 50 hp, 60 hp, 125 hp, 150 hp, TPST Contact, 3 Poles
NEMA Disconnect Accessories
422380
DH364UWK
Eaton
$0.00
/ ea
- Amperage Rating: 200
- Contact Form: TPST
- Dimensions: 36-1/2 in L x 17-3/4 in W x 10 in H
- Enclosure Type: NEMA 4X
- Horsepower: 15 hp, 40 hp, 50 hp, 60 hp, 125 hp, 150 hp
- Material: 304 Stainless Steel
- Number of Poles: 3
- Number Of Wires: 3
- Phase: 1/3
- Series: K Series
- Short Circuit Current Rating: 200
- Type: Heavy Duty Non-Fusible Single Throw
- Voltage Rating: 600
Eaton Heavy duty single-throw non-fused safety switch, Single-throw, 200A, NEMA 4X, Stainless steel, Three-pole, Three-wire, 15 at 240 Vac TD 1 Ph, 50 at 480 Vac TD 1 Ph, 50 at 600 Vac TD 1 Ph, 60 at 240 Vac TD 3 Ph, Non-Fusible
- Features
- Clearly visible palm fitting red handle allows users to easily see the handle position (On/Off) from a distance and provides for easy operation
- Two points of contact provide a positive open and close, easier operation and also help prevent contact burning for longer contact life
- Triple padlocking capability increases personnel safety
- Interlocking mechanism keeps the door closed when the handle is in the ON position to maximize safety, although there is a built-in defeater mechanism for user access when necessary
- Clear line shield protects against accidental contact with energized parts and the probe holes enable the user to test if the line side is energized without removing the shield
- 100% rated device means the switch may be used continuously up to its rated current
- Meets stringent UL 98 standards for safety, durability and reliability
- 15 hp at 240 VAC TD/50 hp at 480 VAC/50 hp at 600 VACTD 1-phase, 60 hp at 240 VAC/125 hp at 480 VAC/150 hp at 600 VAC TD 3-phase, 40 hp at 250 VDC maximum hp rating