Eaton DH364NRK

EATON DH364NRK K Series Heavy Duty Fusible Rainproof Safety Switch With Neutral, 600 VAC, 200 A, 50 hp, 125 hp, 150 hp, TPST Contact, 3 Poles
NEMA Disconnect Accessories
476168 DH364NRK
Eaton
$0.00 / ea

  • Amperage Rating: 200
  • Contact Form: TPST
  • Dimensions: 30 in L x 18 in W x 9-1/2 in H
  • Enclosure Type: NEMA 3R
  • Finish: Galvanized/Painted
  • Horsepower: 50 hp, 125 hp, 150 hp
  • Insulation Type: Class H
  • Material: Steel
  • Number of Poles: 3
  • Number Of Wires: 4
  • Phase: 1/3
  • Series: K Series
  • Short Circuit Current Rating: 200
  • Type: Heavy Duty Fusible Rainproof
  • Voltage Rating: 600
Eaton Enhanced visible blade single-throw safety switch, 200 A, NEMA 3R, Painted galvanized steel, Class H, Fusible with neutral, Three-pole, Four-wire, 600 V, Max Hp: 50, 50/ 125, 150 hp (1/3PH @480, 600 V), #6-250 kcmil Cu/Al
QTY
  • Features
  • Fusible and non-fusible switches are 100% load break and 100% load make rated
  • The continuous load current of fusible switches is not to exceed 80% of the rating of fuses employed in other than motor circuits
  • Suitable for service entrance applications unless otherwise noted
  • Deionizing arc chutes, arc chutes confine and suppress the arcs produced by opening contacts under load
  • Mechanically interlocked cover to prevent easy access when the switch is in the On position
  • Clearly visible palm fitting red handle
  • Premium 316 grade stainless steel enclosures offer better corrosion resistance in the presence of most chemicals, salts and acids and is more resistant to marine atmospheres
  • Visible double break quick make, quick break blades
  • Visible On/Off indications
  • 30 to 1200 a NEMA 12 designs convertible to NEMA 3R by opening factory installed drain hole
  • Tri-lingual nameplates
  • Design for all series K heavy duty
  • Fusible without neutral configuration