Eaton DH363UDKW
EATON DH363UDKW Heavy Duty Non-Fusible Single Throw Safety Switch With Upper Viewing Window, 600 VAC, 100 A, 20 hp, 40 hp, 50 hp, 75 hp, 100 hp, TPST Contact, 3 Poles
NEMA Disconnect Accessories
4334918
DH363UDKW
Eaton
$0.00
/ ea
- Amperage Rating: 100
- Contact Form: TPST
- Dimensions: 22-1/2 in L x 12-1/2 in W x 8-1/2 in H
- Enclosure Type: NEMA 12
- Finish: Galvanized/Painted
- Horsepower: 20 hp, 40 hp, 50 hp, 75 hp, 100 hp
- Material: Steel
- Number of Poles: 3
- Number Of Wires: 3
- Phase: 1/3
- Series: K Series
- Type: Heavy Duty Non-Fusible Single Throw
- Voltage Rating: 600
Eaton Heavy duty single-throw non-fused safety switch, Single-throw, 100 A, NEMA 12, Painted galvanized steel, Non-Fusible, Three-pole, Three-wire, 20 at 240 Vac TD 1 Ph, 40 at 480 Vac TD 1 Ph, 50 at 600 Vac TD 1 Ph, 40 at 240 Vac TD 3 Ph
- Features
- Used to open or close a circuit
- Non-fusible safety switches provide a means to manually connect or disconnect the load from the source
- Fusible safety switches provide a means to manually open and close a circuit and over current protection by means of installed fuses
- Also commonly referred to as a disconnect switch or disconnect
- Easy to install
- Ample wiring space
- Non-fusible configuration
- For 2-pole applications, use outside pole of 3-poles switch
- Can be field modified to meet NEMA 3R rainproof requirements when a factory provided drain hole is opened
- Painted steel enclosure
- Upper viewing window
- 20 hp at 240 VAC/40 hp at 480 VAC/50 hp at 600 VAC TD 1-phase, 40 hp at 240 VAC/75 hp at 480 VAC/100 hp at 600 VAC TD 3-phase, 20 hp at 250 VDC maximum hp rating