Eaton DH362UWK316
EATON DH362UWK316 K Series Heavy Duty Non-Fusible Corrosion Resistant Safety Switch, 600 VAC, 60 A, 10 hp, 20 hp, 25 hp, 50 hp, 60 hp, TPST Contact, 3 Poles
NEMA Disconnect Accessories
7209986
DH362UWK316
Eaton
$0.00
/ ea
- Amperage Rating: 60
- Contact Form: TPST
- Dimensions: 8.13 in L x 10 in W x 12.12 in H
- Enclosure Type: NEMA 4X
- Horsepower: 10 hp, 20 hp, 25 hp, 50 hp, 60 hp
- Material: 316 Stainless Steel
- Number of Poles: 3
- Number Of Wires: 3
- Phase: 1/3
- Series: K Series
- Type: Heavy Duty Non-Fusible Corrosion Resistant
- Voltage Rating: 600
Eaton Custom single-throw non-fused safety switch, Single-throw, 60 A, NEMA 4X, Grade 316 stainless steel, Non-Fusible, Three-pole, Three-wire, 10 at 240 Vac TD 1 Ph, 20 at 480 Vac TD 1 Ph, 25 at 600 Vac TD 1 Ph, 20 at 240 Vac TD 3 Ph
- Features
- Ample wire bending space provides for easier installation
- Visible double break quick make, quick break rotary blade mechanism
- Two points of contact provide a positive open and close, easier operation and also help prevent contact burning for longer contact life
- Triple padlocking capability
- Personnel safety feature since the large hasp can accommodate up to three 3/8 in shank locks
- Clearly visible handle
- The position (On/Off) can be clearly seen from a distance
- Deionizing arc chutes, arc chutes confine and suppress the arcs produced by opening contacts under load
- Additional locking capability, cabinet door can be further padlocked at the top and bottom
- Clear line shield protects against accidental contact with energized parts
- Probe holes enable the user to test if the line side is energized without removing the shield
- Tangential knockouts on sides, top and bottom
- Enables any size of conduit to be mounted close to the wall, providing for cable installation closer to the wall and a neat appearance
- Used to open or close a circuit
- Provide a means to manually open and close a circuit and overcurrent protection by means of installed fuses
- Without neutral lug