Eaton DH261FRK
EATON DH261FRK K Series Heavy Duty Fusible Rainproof Safety Switch, 600 VAC, 30 A, 7-1/2 hp, 10 hp, 15 hp, DPST Contact, 2 Poles
IEC Disconnects and Load Switches
6938866
DH261FRK
Eaton
$0.00
/ ea
- Amperage Rating: 30
- Contact Form: DPST
- Dimensions: 17 in L x 9-1/2 in W x 7-3/4 in H
- Enclosure Type: NEMA 3R
- Finish: Galvanized/Painted
- Horsepower: 7-1/2 hp, 10 hp, 15 hp
- Insulation Type: Class H
- Material: Steel
- Number of Poles: 2
- Number Of Wires: 2
- Phase: 1
- Series: K Series
- Short Circuit Current Rating: 10
- Type: Heavy Duty Fusible Rainproof
- Voltage Rating: 600
Eaton Heavy duty single-throw fused safety switch, 30 A, NEMA 3R, Painted galvanized steel, Class H, Fusible without neutral, Two-pole, Two-wire, 600 V, Max Hp: 7.5, 10 hp/15 hp (1PH @480,600 V TD/600 Vdc), #14-#2 Cu/Al
- Features
- Ample wire bending space provides for easier installation
- Visible double break quick make, quick break rotary blade mechanism
- Two points of contact provide a positive open and close, easier operation and also help prevent contact burning for longer contact life
- Triple padlocking capability
- Personnel safety feature since the large hasp can accommodate up to three 3/8 in shank locks
- Clearly visible handle
- The position (On/Off) can be clearly seen from a distance
- Deionizing arc chutes, arc chutes confine and suppress the arcs produced by opening contacts under load
- Additional locking capability, cabinet door can be further padlocked at the top and bottom
- Clear line shield protects against accidental contact with energized parts
- Probe holes enable the user to test if the line side is energized without removing the shield
- Tangential knockouts on sides, top and bottom
- Enables any size of conduit to be mounted close to the wall, providing for cable installation closer to the wall and a neat appearance
- Used to open or close a circuit
- Provide a means to manually open and close a circuit and overcurrent protection by means of installed fuses
- Without neutral lug